Electric Motors & Power Control Electronics

Newsil provides silicone material options for electric motors, motor controllers, power electronics, and industrial control systems. This category covers solutions for potting, encapsulation, electrical insulation, and component protection, including selected thermal management applications. Compare the listed products and their technical data to find an appropriate material for your equipment design and manufacturing process.

WS-9160GL

Two-component addition-cure thermal potting, 1:1, gray/white

WS-668-G20S

Thermal conductivity 2.0 W/(m·K) potting compound

WS-668-G20S-JH1

Thermal conductivity 2.0 W/(m·K); hardness 55±5 Shore 00

WS-668-Y20

Thermal conductivity 2.8 W/(m·K)

WS-668-Y30S

Hardness 65±10 Shore 00 thermally conductive compound

WS-718M35S

Thermal conductivity 3.6 W/(m·K)

WS-9110R

Two-component RTV or heat cure; cures to flexible elastomer

WS-9160GH-27

Two-component addition-cure thermal potting, 1:1 mix

WS-9180G-LV

Viscosity 5500 mPa·s; ultra-high leveling

WS-9180G

Solvent-free, low-shrinkage potting; 1.5 W/m·K

WS-9180G-40

Gray two-component potting compound

WS-9180-Z06

Black two-component potting compound